Replacing windows is less disruptive than most people expect, especially when you know what will happen on the day. Here is how a typical window installation runs for a Penrith home, from the first measure to the clean-up.
Before the day: measure and order
Every window is made to order, so it starts with an accurate measure. We measure each opening on-site, check whether the existing frame can stay, and confirm glass type, frame colour and opening style. If you want to understand the measurements first, our guide on how to measure a window frame explains them.
The big decision at this stage is whether to keep the frame and replace the glass and sashes, or replace the whole window. Our article on retro-fit vs full replacement explains when each makes sense.
What to do beforehand
- Move furniture about a metre back from each window.
- Take down curtains and blinds, or tell us and we will work around them.
- Clear window sills and nearby shelves.
- Keep pets in another room or outside.
- Make sure we can reach the outside of each window, including side passages.
On the day
- Protecting the room. We lay drop sheets and set up a clear path to each window.
- Removing the old window. For a full replacement the old frame comes out. For a retro-fit, only the glass and sashes are removed.
- Checking the opening. We check the opening is square and level, because brick and timber openings are rarely perfect.
- Fitting the new frame. The frame is packed, fixed and sealed so it sits true and weathertight.
- Glazing. The glass goes in with new seals.
- Testing. We open, close and lock every sash and check the seals and drainage.
- Clean-up. We remove the old windows and packaging and clean the new glass.
How long does it take?
It depends on the number of windows and whether frames are being replaced. A straightforward retro-fit can take a couple of hours per window, while full frame replacements in brick take longer because of the making good around the frame. We give you a realistic schedule when we quote, and each opening is closed up the same day.
Safety glass and standards
Any new window is glazed to the current Australian Standard for its location. That can mean toughened or laminated glass in places the old window had plain glass, such as low-level panes or glass near doors.
What it costs
Prices vary with size, glass type and frame. Our window replacement cost guide gives current Penrith price ranges.
Book a measure
We supply and install aluminium windows and doors across Penrith, Emu Plains, Jamisontown and Western Sydney, from sliding windows to fixed and awning styles. We also handle commercial windows, like the aluminium windows at the Nepean Motor Group site. Call 02 4722 2787.
