Panther Glass supplies curtain wall glazing Penrith 2750 builders specify on commercial refits and new-build facades, from Panthers precinct offices through the CBD and out along the Nepean Highway. Systems are engineered, shop-drawn and glazed to AS 1288.
How we run Curtain Wall Glazing Penrith projects
Curtain wall glazing Penrith projects we run cover new commercial builds and refits from the CBD out along the Nepean Highway. Every curtain wall glazing job starts with shop drawings and engineering, then framing, then glass. We coordinate cranage and program to fit the builder’s schedule so the facade doesn’t sit exposed longer than needed.
Design, engineering and shop drawings
For each project we produce shop drawings covering elevations, sections, bracket details and glass schedules. Engineering sign-off is included where the panel size or exposure requires it. Drawings go to the builder and architect for review before we cut any framing.
Weather sealing and gaskets
Curtain wall systems live and die on their sealing, so we use factory-cut gaskets and site-applied silicones to the manufacturer’s spec. Drainage paths through the framing are checked before glass goes in, and any penetrations are flashed and sealed as part of the install.
- Stick-built aluminium curtain wall systems in 50 and 100 mm framing depths
- Structural silicone glazed and mechanically capped facade options to suit the architect’s spec
- Full shop drawings, engineering sign-off and glass schedules included before fabrication starts
- Toughened, laminated and insulated glazing unit make-ups installed to AS 1288
- Direct coordination with steel, cladding, precast and roofing subcontractors on site
Panther Glass has been fitting curtain wall glazing across Penrith 2750 since 1985, and we still dispatch every job from our own Jamisontown workshop just up the road. For system options, shop-drawing turn-around and engineering scope see our Curtain Wall Glazing service page. Related work is listed on the Penrith area page, or ring 02 4722 2787.
Frequently asked questions
Do you supply shop drawings and engineering?
Yes. Every curtain wall project comes with shop drawings covering elevations, sections and bracket details. Engineering sign-off is included where the panel size or site exposure requires it, and drawings go to the builder and architect for approval before we cut framing or order glass.
Can you match an existing facade system for extensions?
Most modern aluminium curtain wall systems can be matched or extended. We identify the existing profile from photos or samples, then either extend using the same system or specify a compatible replacement that reads as a continuation rather than a patch.