Because our workshop sits right in Jamisontown 2750, curtain wall glazing Jamisontown builders order goes straight from Unit 5 & 6 / 18 Abel Street to site. We dispatch from our Jamisontown workshop with framing, gaskets and glass on the same delivery run.
Booking a Curtain Wall Glazing Jamisontown site visit
For curtain wall glazing Jamisontown builds, the shop and the site are on the same road. We dispatch from our Jamisontown workshop with framing and gaskets ready, and every curtain wall glazing job is delivered in stages to match the builder’s cranage windows. Shop drawings, engineering and glazing are all included in the lump sum.
Turnaround from award to install
Shop drawings typically take two to three weeks after award, framing fabrication three to five weeks, and glass another two to four weeks depending on the make-up. Total lead time from award to first panel on site is usually seven to twelve weeks.
Facade glazing to AS 1288
All glazing is installed to AS 1288 with the correct edge cover, glazing tape and setting blocks. Toughened, laminated and IGU glass are all standard, and the glass schedule is documented so replacement panes years down the track match the original spec.
- Stick-built aluminium curtain wall systems in 50 and 100 mm framing depths
- Structural silicone glazed and mechanically capped facade options to suit the architect’s spec
- Full shop drawings, engineering sign-off and glass schedules included before fabrication starts
- Toughened, laminated and insulated glazing unit make-ups installed to AS 1288
- Direct coordination with steel, cladding, precast and roofing subcontractors on site
Because our workshop is in Jamisontown 2750 itself, we usually get to curtain wall glazing bookings faster than anyone else in the postcode. Because framing and glass are staged from our Jamisontown workshop, cranage windows are easy to hit. See our Curtain Wall Glazing service page or the Jamisontown area page. Phone 02 4722 2787.
Frequently asked questions
Can you match an existing facade system for extensions?
Most modern aluminium curtain wall systems can be matched or extended. We identify the existing profile from photos or samples, then either extend using the same system or specify a compatible replacement that reads as a continuation rather than a patch.
Do you supply shop drawings and engineering?
Yes. Every curtain wall project comes with shop drawings covering elevations, sections and bracket details. Engineering sign-off is included where the panel size or site exposure requires it, and drawings go to the builder and architect for approval before we cut framing or order glass.