Curtain wall glazing Glenmore Park 2745 projects are usually smaller commercial and medical builds tucked into the newer estate around Mulgoa Road. We engineer stick systems to suit the elevation, glazing type and wind loads.
Turnaround on Curtain Wall Glazing Glenmore Park awards
Curtain wall glazing Glenmore Park projects are typically smaller commercial and medical builds around the M4 exit. Every curtain wall glazing job is engineered to the wind load, glass type and panel size, with shop drawings and sign-off included in the quote before we start fabrication.
Weather sealing and gaskets
Curtain wall systems live and die on their sealing, so we use factory-cut gaskets and site-applied silicones to the manufacturer’s spec. Drainage paths through the framing are checked before glass goes in, and any penetrations are flashed and sealed as part of the install.
Turnaround from award to install
Shop drawings typically take two to three weeks after award, framing fabrication three to five weeks, and glass another two to four weeks depending on the make-up. Total lead time from award to first panel on site is usually seven to twelve weeks.
- Stick-built aluminium curtain wall systems in 50 and 100 mm framing depths
- Structural silicone glazed and mechanically capped facade options to suit the architect’s spec
- Full shop drawings, engineering sign-off and glass schedules included before fabrication starts
- Toughened, laminated and insulated glazing unit make-ups installed to AS 1288
- Direct coordination with steel, cladding, precast and roofing subcontractors on site
Panther Glass covers curtain wall glazing through Glenmore Park 2745 from the M4 exit out through the newer estate streets, dispatched from our Jamisontown workshop nearby. For smaller commercial curtain wall detail see the Curtain Wall Glazing service page or the Glenmore Park suburb page. Book a site meeting on 02 4722 2787.
Frequently asked questions
Do you handle cranage and EWP access?
Yes. Cranage or EWP hire is included in the quote where the site needs it, and access windows are coordinated with the builder so the facade doesn’t sit exposed longer than necessary. We attend site meetings when the facade is on the critical path so timing decisions get made in the room.
What is the lead time from award to first panel on site?
Typically seven to twelve weeks. Shop drawings run two to three weeks after award, framing fabrication three to five weeks, and glass another two to four weeks depending on makeup. The programme is confirmed in writing before award and updated at each site meeting so the builder can plan cranage.