Curtain wall glazing Kingswood 2747 clients spec often lands on Nepean Hospital-adjacent medical suites, Western Sydney Uni buildings and mixed-use blocks near the station. Facades here are shop-drawn to the builder’s program.
How we run Curtain Wall Glazing Kingswood projects
Curtain wall glazing Kingswood work often lands on medical suites near Nepean Hospital and academic buildings for Western Sydney University. Every curtain wall glazing package includes shop drawings, engineering, framing, glass and cranage, staged around the builder’s program so glazing follows framing cleanly.
Working with builders and project managers
We deal directly with site foremen and project managers, joining site meetings when the facade is on the critical path. Progress claims and variations are documented cleanly so there are no surprises at the end of the job. Shop drawing revisions get turned around inside a working day where the builder needs to keep moving.
Curtain wall systems we supply
We supply stick-built aluminium curtain wall systems in 50 and 100 mm framing depths, with structural silicone or capped glazing options. Systems are chosen to suit the facade span, wind load and glass thickness, and every job is shop-drawn before fabrication starts.
- Stick-built aluminium curtain wall systems in 50 and 100 mm framing depths
- Structural silicone glazed and mechanically capped facade options to suit the architect’s spec
- Full shop drawings, engineering sign-off and glass schedules included before fabrication starts
- Toughened, laminated and insulated glazing unit make-ups installed to AS 1288
- Direct coordination with steel, cladding, precast and roofing subcontractors on site
Panther Glass runs curtain wall glazing across Kingswood 2747 around Nepean Hospital and the Western Sydney Uni campus, dispatched from our Jamisontown workshop. For hospital- and university-adjacent facade work see our Curtain Wall Glazing service page or the Kingswood area page. Ring 02 4722 2787.
Frequently asked questions
Do you supply shop drawings and engineering?
Yes. Every curtain wall project comes with shop drawings covering elevations, sections and bracket details. Engineering sign-off is included where the panel size or site exposure requires it, and drawings go to the builder and architect for approval before we cut framing or order glass.
Can you match an existing facade system for extensions?
Most modern aluminium curtain wall systems can be matched or extended. We identify the existing profile from photos or samples, then either extend using the same system or specify a compatible replacement that reads as a continuation rather than a patch.