Aluminium louvres Emu Plains 2750 clients ask for tend to be plant-room screens and facade shading along the Great Western Highway, where westerly sun on retail glazing gets ugly by 3pm in summer. We make the blades in-house and set the pitch to the sun angle for the elevation.
What a Aluminium Louvres Emu Plains order includes
Aluminium louvres Emu Plains projects usually go on west and north facades of highway commercial buildings to cut afternoon glare. We pick blade pitch based on the sun angle at the elevation. Every aluminium louvres quote we send lists the blade profile, colour and engineered bracket spacing so nothing is left to chance.
Fabrication and finish options
All aluminium is finished in either powder coat or anodised, with powder coat available in the full Dulux and Interpon ranges. We supply matching frames, blades, brackets and fixings so the finished screen reads as one piece. Marine-grade coatings are available for coastal or high-exposure sites.
Sizes and colours to spec
Blade lengths cut up to about 6 metres in a single piece; longer panels are engineered as multiple bays with a matching mullion. Standard colours we stock cover most of the common architectural greys, whites and blacks; anything else is ordered in on a project basis.
- Fixed, adjustable and manually or motorised operable blade systems for every application
- Blade profiles from 50 mm elliptical through 100, 150, 200 and 300 mm flat cut to length
- Powder coat and anodised finishes in any Dulux or Interpon colour, with marine-grade coating on request
- Engineered bracket spacing and stainless fixings sized to the site wind load and exposure
- Facade sunshades, plant screens, pool-fence infills and residential deck privacy panels
Panther Glass covers aluminium louvres through Emu Plains 2750 all the way from Lennox Bridge to the foot of the Blue Mountains, dispatched from our Jamisontown workshop. For facade sunshade options and lead times see our Aluminium Louvres page or the Emu Plains suburb page. Bookings and quotes: 02 4722 2787.
Frequently asked questions
What blade pitch do you recommend for privacy?
For a full privacy screen we typically run a 200 mm elliptical blade at 60 mm pitch, which sits at about zero percent see-through at eye level. For airflow with partial privacy we open the pitch to 80 or 100 mm, and we can supply a physical mock-up panel before you commit if the sightline is critical.
Can louvres be adjustable or operable?
Yes. We supply manual and motorised operable blade systems as well as fixed. Motorised units integrate with a standard building management system or a simple wall switch depending on the setup, and we can wire the actuator to a rain and wind sensor where the exposure warrants it.